Race Track Play Decal TROFAST | 16.7x39.4 in

🏎️ Play World Furniture Decal “Race Track” – ideal for IKEA TROFAST storage units & individually trimmable – 16.7 x 39.4 in

Turn Furniture into Play Worlds

Our Fineline Creatives play world furniture decals transform shelves, cabinets and tabletops into imaginative play worlds for little adventurers.

✂️ The decal adapts to your furniture – not your furniture to the decal
Our furniture decals are intentionally not pre-cut to fit one specific piece of furniture. This allows you to flexibly adapt the play worlds and designs to your existing furniture.

✓ Easy-care, water-resistant & wipe-clean – ideal for everyday family life

📏 Size & Flexible Fit
✓ Decal size: 16.7 x 39.4 in (42.5 x 100 cm)
✓ Ideal, for example, for the top of an IKEA TROFAST storage unit
✓ TROFAST top surface dimensions: approx. 42.8 x 95.5 cm (16.9 x 37.6 in)
✓ Also suitable for many other cabinets, shelves and tabletops
✓ For suitable smooth furniture surfaces
✓ Individually trimmable to the required furniture size

🛡️ Tested Material Safety for Families
Independent laboratory tests and test reports are available for the film material used. The material was tested, among other things, for regulated potentially harmful substances such as heavy metals, certain flame retardants and phthalates. No values above the applicable limits or detection thresholds were found. In addition, its flame spread and smoke development were tested and met the specified requirements.

❤️ Where children play, adventures, stories and shared memories are created.

ℹ️ What's Included:
Only the furniture decal is supplied. Furniture, toys and decorations are not included.

🔵 Tested Material Safety for Families
Independent laboratory tests and supporting test reports are available for the film material used. Testing included regulated potentially harmful substances such as heavy metals, certain flame retardants and phthalates. No values above the applicable limits or detection thresholds were identified. Fire and smoke performance was also tested and met the specified requirements.

❤️ Where children play, adventures, stories and shared memories are created.

🏁 Welcome to the Race Track
A simple furniture surface becomes an exciting racing world full of curves, start and finish lines and lovingly designed details. Here, little racing drivers can create their own competitions and invent new stories about fast cars and exciting races again and again.

With toy cars, racing cars and play figures, an existing piece of furniture becomes the setting for ever-changing adventures. Who starts from pole position? Who masters the most challenging curves? And who will be the first to cross the finish line?

Children can:
✓ invent their own car races and race track adventures
✓ line up vehicles at the start and hold exciting races
✓ create drivers, racing teams and winner stories
✓ enjoy imaginative role play
✓ play, tell stories and discover together

🚗 Compatible with Popular Toy Cars
The play world is ideal for toy cars, racing cars, vehicles and play figures, for example from Hot Wheels®, Matchbox®, Majorette®, siku® and similar brands.

This means children can integrate their existing favourite vehicles into the race track play world again and again.

❤️ Play Worlds That Bring Children Together
Our play worlds invite children to discover, tell stories and enjoy imaginative play together.

Our play worlds encourage:
✓ imagination & creative role play
✓ communication & shared storytelling
✓ independent play & learning
✓ playing together & social interaction

Children can immerse themselves in a play world, develop stories and play together regardless of language, background or individual abilities.

🏡 Versatile Use
Ideal for:
• children’s rooms and play areas
• families at home
• kindergartens and schools
• childcare facilities
• waiting and play areas
• holiday homes, hotels and restaurants

✂️ Easy to Apply & Individually Trim
1. Prepare the Surface
Thoroughly remove dust, dirt and grease from the furniture surface and allow it to dry completely. The surface should be smooth, clean and dry.
2. Position & Align the Decal
Place the furniture decal on the surface with the backing paper still attached, position it carefully and secure it in the centre with suitable adhesive tape.
3. Apply the First Half
Fold back one half of the decal, carefully peel away the backing paper to approximately the middle and cut it off. Then slowly apply the decal and smooth it down evenly.
4. Apply the Second Half
Remove the temporary fixing, peel away the remaining backing paper little by little and slowly apply the second half, smoothing it down evenly.
5. Trim to Fit Your Furniture
Carefully trim any excess decal along the edge of the furniture using a standard utility knife until it fits the required dimensions.

Tip: Work slowly and in sections. The decal can be repositioned during application and, if necessary, carefully lifted and realigned.

Removable: The furniture decal can be removed from the surface if required. For particularly easy removal, gently warm the decal with warm air, for example using a hairdryer, and then slowly peel it off piece by piece.

🧩 Material & Product Details
✓ Size: 16.7 x 39.4 in (42.5 x 100 cm)
✓ Material: 100% polyester
✓ Matte finish
✓ Easy-care, water-resistant & wipe-clean – ideal for everyday family life
✓ Self-adhesive with pressure-sensitive adhesive
✓ Repositionable during application
✓ Individually trimmable
✓ High-quality print
✓ Individually made for your order

🛡️ Tested Material Safety & Quality
Independent laboratory tests and test reports are available for the film material used:

✓ EU RoHS – SGS (independent testing laboratory)
The material was tested, among other things, for lead, mercury, cadmium, hexavalent chromium, brominated flame retardants and regulated phthalates. The measured values were within the applicable requirements or below the respective detection limits.

✓ REACH SVHC – SGS (independent testing laboratory)
The material was tested for Substances of Very High Concern (SVHC) in accordance with the REACH Candidate List applicable at the time of testing. None of the tested SVHC substances were detected above the relevant threshold of 0.1%.

✓ ASTM E84 – HPVA Laboratories (independent testing laboratory)
The material was tested for flame spread and smoke development and achieved a Class A rating.

The material properties and stated safety standards are documented by independent testing laboratories.

📦 Delivery
• Individually made (Print-on-Demand)
• Delivery time approx. 5–7 business days

↩ Returns & Replacements
Each product is produced after an order is placed. Please check your selection carefully before purchasing. Applicable statutory cancellation and consumer rights remain unaffected.
We are happy to help with production defects, damage, incorrect deliveries or packages confirmed lost in transit.
Please report any issues preferably within 7 days of delivery and include a photo of the affected product.

⚠️ Note
Slight colour variations may occur due to technical reasons.
All designs are protected by copyright.

ℹ️ Transparency Notice:
AI-based tools were used to support the creative development of this design and some product representations. The final design and editing are carried out by Fineline Creatives.

ℹ️ Transparency Notice:
AI-based tools were used to support the creative development of this design and selected product visuals. The final design and editing are completed by Fineline Creatives.